NYCOMCO Product Detail

  • Kenwood NX-720H/820H NEXEDGE VHF/UHF Digital & FM Mobile Radios

    Kenwood NX-720H/820H NEXEDGE VHF/UHF Digital & FM Mobile Radios

    Frequency Range
     ・VHF: 136-174 MHz (NX-720(G) / 720H(G))
     ・UHF: 450-520 MHz, 400-470 MHz, 350-400 MHz (NX-820(G) / 820H(G))
     ・800 MHz: RX: 851-870 MHz, TX: 806-825 / 851-870 MHz (NX-920(G))
    RF Output (Operation guaranteed for 1-5 W)
     ・VHF: 5-25 W (NX-720(G) for Europe)
          5-30 W (NX-720(G))
          5-30-50 W (NX-720H(G))
     ・UHF: 5-25 W (NX-820(G) for Europe)
          5-30 W (NX-820(G))
          5-30-45 W (NX-820H(G))
     ・800 MHz: 5-15 W (NX-920(G))
    260 Channel / Group ID with 128 Zones
    6 Front PF keys & 4 Up / Down Selectors
    Emergency / AUX Key
    10 Character Alphanumeric Aliases Display
    4 W Speaker Audio
    Single Priority Scan (Conventional)
    DB-15 Accessory Connector
    Flash Firmware Upgrading
    MIL-Spec Standard Mic
    MIL-Spec 12-Key DTMF Mic Option Available
    MIL-STD-810 C / D / E / F / G
    MIL-STD “Driven-Rain”
    IP54 Water & Dust Intrusion
    Built in GPS Receiver
    (only “G” model. Optional GPS Active Antenna KRA-40G available)

    • For Analog

      25, 20*1 & 12.5 kHz Channels
      FleetSync® / II, MDC-1200
      QT / DQT / DTMF
      2-tone / 5-tone*1 Encode / Decode
      Voice Inversion Scrambler (16codes)

    • For Digital

      NXDN® Digital Air Interface
      NXDN® Scrambler Included
      AMBE+2™ VOCODER
      6.25 & 12.5 kHz Channels
      Over-the-Air Alias
      Over-the-Air Programming
      Digital Conventional Mode
      Digital Trunking Mode
      Mixed FM / Digital Operation (Conventional)
      Multi-Site IP Network Compatible
      Conventional IP Network Compatible
      Telephone Interconnect (Trunking)

    • MDC-1200

      PTT ID ANI / Caller ID
      Emergency, Radio Check & Inhibit
      Emergency Status & Test Messages
      Radio Check
      Radio Inhibit